Pollution

Non-renewable Energy/Global Warming/Pollution

Grades:
4-5
Unit:
Solar Ovens
Lesson Number:
3
Description:

NOTE: THIS LESSON RELIES ON EPA CLIMATE CHANGE RESOURCES THAT ARE NO LONGER AVAILABLE. STUDENTENERGY.ORG PROVIDES A POSSIBLE ALTERNATIVE RESOURCE.

This lesson will introduce the students to worldwide problems that we have with energy. (91% of the...

Energy Content:
Sources of Energy
+
-
More Details Less Details
Learning Goal(s):
Students will explore why there is a need for energy efficiency and renewable energy. Students will determine how non-renewable and renewable energy are a part of our lives. Students will understand how the greenhouse effect and nonrenewable energy sources relate to climate change.
NGSS Science and Engineering Practices:
2: Developing and Using Models
Author:
Debbie Abel
Relevant NGSS PE:
4-PS3-2,
4-PS3-4,
3-5-ETS1-1,
3-5-ETS1-2,
3-5-ETS1-3
Estimated Activity Length:
50 min
Foil Barge

What is Force?

Grades:
4-6
Unit:
Solar Boats
Lesson Number:
3
Description:

Students will build a barge out of tin foil and describe the forces acting it. The barge itself is designed only with the constraints that passengers within the barge will not get wet, allowing for students to experiment with different shapes and...

Energy Content:
Energy Fundamentals,
Potential & Kinetic Energy
+
-
More Details Less Details
Learning Goal(s):
Students will identify the Laws of Motion and learn about the forces acting on the system. There are multiple forces acting on a boat, some of these forces include, acceleration, friction, gravity and thrust.
Pedagogy & Practice:
Engineering Design,
Group Work/Collaboration,
Hands-on Materials
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
2: Developing and Using Models,
6: Constructing Explanations and Designing Solutions
Author:
Carol Patrick
Relevant NGSS PE:
4-PS3-2,
4-PS3-4,
3-5-ETS1-1,
3-5-ETS1-2,
3-5-ETS1-3
Other Subjects Covered:
ELA: Vocabulary Development
Estimated Activity Length:
1 hour

Engineering Clean Energy for Our Community

Grades:
4-5
Unit:
Understanding E-Waste Through Battery Design
Lesson Number:
3
Description:

This lesson plan will engage students in a design process to power a motor using a variety of energy sources. Students will compare different clean energy sources to decide which energy source will complete their design goal. Students will experiment with...

Energy Content:
Batteries & Storage,
Circuitry,
Electrical Energy,
Electricity Generation,
Electronics,
Electrons,
Energy Fundamentals,
Fuels,
Hydrogen,
Potential & Kinetic Energy,
Solar Photovoltaic,
Sources of Energy,
Wind Energy
+
-
More Details Less Details
Learning Goal(s):
1.Students will define “clean energy” and explain at least 4 types of alternative energy sources2.Students will compare local energy sources and national energy sources to potential energy sources being used or developed.3.Students will experiment with wind energy, solar energy, and hydrogen fuel cell model vehicles to explore alternative fuel sources.4.Students will measure voltage produced and record data in a table format.5.Students will discuss pros and cons of the different types of energy.
Pedagogy & Practice:
21st Century Skills Development,
Engineering Design,
Group Work/Collaboration,
Hands-on Materials,
Phenomena-Driven Instruction,
Project-Based Learning,
Research-Secondary
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
2: Developing and Using Models,
4: Analyzing and Interpreting Data,
5: Using Mathematics and Computational Thinking,
6: Constructing Explanations and Designing Solutions,
7: Engaging in Argument from Evidence,
8: Obtaining, Evaluating, and Communicating Information
Author:
Jonathan Strunin
Relevant NGSS PE:
5-ESS3-1,
3-5-ETS1-1,
3-5-ETS1-2,
3-5-ETS1-3
Other Subjects Covered:
Environmental Sciences,
ELA: Informational Text,
ELA: Reading: Scientific & Technical,
ELA: Vocabulary Development,
Math: Graphing & Representation,
Math: Measurement,
Social Sciences: Analysis
Estimated Activity Length:
5 hours

Engineering 101

Grades:
5-8
Unit:
Adrift in a Sea of Plastic
Lesson Number:
3
Description:

This lesson is designed for 3, 50-minute sessions. The students will engage in multiple mini-engineering challenges to develop their understanding of structures and how to build models. The students will also learn to use the 3D pens to create a 3D object...

Energy Content:
Materials Science,
Next Generation Manufacturing
+
-
More Details Less Details
Learning Goal(s):
·       Students will understand some basics of engineering.·       Students will become familiar with 3D pens and how to use them.
Pedagogy & Practice:
21st Century Skills Development,
English Language Strategies,
Engineering Design,
Establishing a Culture of Science,
Group Work/Collaboration,
Hands-on Materials,
Phenomena-Driven Instruction,
Project-Based Learning,
STEAM/Arts
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
6: Constructing Explanations and Designing Solutions
Author:
Jonathan Strunin
Relevant NGSS PE:
5-ESS3-1,
3-5-ETS1-1,
3-5-ETS1-2,
3-5-ETS1-3,
MS-ESS3-3,
MS-ETS1-1,
MS-ETS1-2,
MS-ETS1-3
Estimated Activity Length:
2 hours
Earth Sun

Saving Lives with Solar Ovens

Grades:
3-5
Unit:
Cooking with the Sun and Solar Ovens
Lesson Number:
4
Description:

Students will be introduced to Solar Cookers International. Students will learn about different solar cooker designs and how they function. Students will learn the pros and cons on the use of solar ovens in developing countries. Students will gain an...

Energy Content:
Solar Thermal
+
-
More Details Less Details
Learning Goal(s):
Students will learn about different solar cooker designs and how they function. Students will learn the customs, jobs, food and clothing of people in different countries of Africa.
Pedagogy & Practice:
Empathetic Engineering,
Engineering Design,
Multiple Learning Styles,
Phenomena-Driven Instruction,
Research-Secondary,
Social-Emotional Learning,
STEAM/Arts
NGSS Science and Engineering Practices:
8: Obtaining, Evaluating, and Communicating Information
Author:
Lisa Morgan
Relevant NGSS PE:
3-ESS2-1,
3-ESS2-2,
4-PS3-2,
4-PS3-4,
4-ESS3-1,
3-5-ETS1-1,
3-5-ETS1-2,
3-5-ETS1-3
Other Subjects Covered:
ELA: Informational Text,
ELA: Reading: Literature,
ELA: Speaking & Listening,
ELA: Writing,
Social Sciences: Multicultural Studies
Estimated Activity Length:
50 min
Solar Updraft

Let's Build Our Wind and Solar Energy Toy

Grades:
3-8
Unit:
Solar Updraft Towers
Lesson Number:
4
Description:

Students will combine what they learned in previous lessons using their investigations of convection-related phenomena to design a device that will convert light energy from the sun into thermal energy and utilize the resulting convection currents. Their...

Energy Content:
Solar Thermal,
Thermal Energy (Heat),
Wind Energy
+
-
More Details Less Details
Learning Goal(s):
Students will determine that thermal energy resulting from the sun’s radiation can create an updraft that will power a turbine to spin.                                                Students will identify characteristics of turbine design that improve the success of their device.Students will utilize content from previous phenomena they investigated, such as the chimney stack effect and Norwegian candle toys, to determine how to best harness the energy transformed by their device from the sun.
Pedagogy & Practice:
Engineering Design
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
6: Constructing Explanations and Designing Solutions
Author:
Lisa Morgan
Relevant NGSS PE:
4-PS3-2,
4-PS3-3,
4-PS3-4,
4-ESS3-1,
3-5-ETS1-1,
3-5-ETS1-2,
3-5-ETS1-3
Estimated Activity Length:
3 hours
Solar Car Race

Collect Data...Then Compare and Contrast

Grades:
4-6
Unit:
Solar Cars
Lesson Number:
4
Description:

Students will race different iterations of solar cars: geared and pulley-system cars using varying gear ratios. Students will have the opportunity to make predictions, record data, and explain the results centered on the selection of these different...

Energy Content:
Circuitry,
Solar Photovoltaic
+
-
More Details Less Details
Learning Goal(s):
Students will:Compare and contrast forces acting on the system by examining the results of the solar car races.Explain the mechanics of gear ratios and demonstrate the most useful ratio to use when constructing solar cars.Explain the benefits of employing a pulley-system in their car construction. Students will understand the importance of selecting measurable, specific variables to compare in their data collection process in order to make evidence-based claims.
Pedagogy & Practice:
Engineering Design,
Group Work/Collaboration,
Hands-on Materials,
Project-Based Learning
NGSS Science and Engineering Practices:
3: Planning and Carrying Out Investigations,
4: Analyzing and Interpreting Data
Author:
Carol Patrick
Relevant NGSS PE:
4-PS3-2,
4-PS3-4,
3-5-ETS1-1,
3-5-ETS1-2,
3-5-ETS1-3
Other Subjects Covered:
Math: Measurement
Estimated Activity Length:
1 hour

Design and Engineer Solutions

Grades:
5-8
Unit:
Adrift in a Sea of Plastic
Lesson Number:
4
Description:

This lesson is designed to span 9 days with 50-minute sessions. The students will use a Design and Engineering Journal to guide them in the design and engineering process. In small groups they will use the research from lesson 2 to formulate solutions to...

Energy Content:
Circuitry,
Electrical Energy,
Materials Science,
Next Generation Manufacturing,
Solar Photovoltaic
+
-
More Details Less Details
Learning Goal(s):
Students will take part in the engineering design process.Students will use problem solving skills to make changes to designs.Students will use speaking and listening skills to give presentations and listen to others give their presentation.
Pedagogy & Practice:
21st Century Skills Development,
Culturally Sustaining,
English Language Strategies,
Engineering Design,
Establishing a Culture of Science,
Group Work/Collaboration,
Hands-on Materials,
Phenomena-Driven Instruction,
Project-Based Learning,
Research-Secondary,
STEAM/Arts
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
2: Developing and Using Models,
3: Planning and Carrying Out Investigations,
4: Analyzing and Interpreting Data,
5: Using Mathematics and Computational Thinking,
6: Constructing Explanations and Designing Solutions,
7: Engaging in Argument from Evidence,
8: Obtaining, Evaluating, and Communicating Information
Author:
Jonathan Strunin
Relevant NGSS PE:
5-ESS3-1,
3-5-ETS1-1,
3-5-ETS1-2,
3-5-ETS1-3,
MS-ESS3-3,
MS-ETS1-1,
MS-ETS1-2,
MS-ETS1-3
Other Subjects Covered:
Computer Science,
Environmental Sciences,
ELA: Speaking & Listening,
Math: Geometry,
Math: Graphing & Representation,
Math: Measurement
Estimated Activity Length:
7 hours
Kidwind Small Water Pump

Making Observations and Recording Data for Solar Powered Water Pumping

Grades:
2-5
Unit:
Understanding Science and Engineering Through Solar Power
Lesson Number:
5
Description:

Students use a solar module and water pump to test how quickly one cup of water can be pumped.

Energy Content:
Circuitry,
Electrical Energy,
Solar Photovoltaic
+
-
More Details Less Details
Learning Goal(s):
Students will be able to make observations and record data about how quickly a solar module will drive a pump to move water.
Pedagogy & Practice:
Engineering Design,
Group Work/Collaboration,
Hands-on Materials,
Project-Based Learning
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
3: Planning and Carrying Out Investigations,
4: Analyzing and Interpreting Data,
5: Using Mathematics and Computational Thinking,
6: Constructing Explanations and Designing Solutions,
7: Engaging in Argument from Evidence,
8: Obtaining, Evaluating, and Communicating Information
Author:
Mike Hellis
Relevant NGSS PE:
4-PS3-2,
4-PS3-4,
3-5-ETS1-1,
3-5-ETS1-2
Other Subjects Covered:
Math: Graphing & Representation,
Math: Measurement
Estimated Activity Length:
1 hour
Solar Updraft Tower

Learning About Solar Updraft Towers

Grades:
3-8
Unit:
Solar Updraft Towers
Lesson Number:
5
Description:

This lesson helps students learn about solar updraft towers being planned and built around the world to help solve the energy crisis by using unlimited power from the sun. This will provide real world context to the engineering challenge they engaged in...

Energy Content:
Solar Thermal,
Sources of Energy,
Thermal Energy (Heat),
Wind Energy
+
-
More Details Less Details
Learning Goal(s):
Students will be able to define and explain what a solar updraft tower is.Students will make connections between their previous engineering challenge and a real world solution to the world’s growing energy demands, including careers.
Pedagogy & Practice:
Engineering Design,
Research-Secondary
NGSS Science and Engineering Practices:
8: Obtaining, Evaluating, and Communicating Information
Author:
Lisa Morgan
Relevant NGSS PE:
4-PS3-2,
4-PS3-3,
4-PS3-4,
4-ESS3-1,
4-ESS3-2,
3-5-ETS1-1,
3-5-ETS1-2,
3-5-ETS1-3
Other Subjects Covered:
ELA: Speaking & Listening
Estimated Activity Length:
0 sec

Pages