Unit Plan: Understand E-Waste Through Battery Design

Grades:
4-5
Unit:
Understanding E-Waste Through Battery Design
Description:

In this lesson students will further explore their understanding of energy, electricity, and basic circuits. Students will begin their exploration of batteries by questioning where batteries end up when we are done using them, making connections to e-waste...

Energy Content:
Batteries & Storage,
Circuitry,
Electrical Energy,
Electricity Generation,
Electronics,
Electrons,
Fuels,
Hydrogen,
Potential & Kinetic Energy,
Solar Photovoltaic,
Sources of Energy,
Wind Energy
+
-
More Details Less Details
Learning Goal(s):
1.Students will make connections to real world problem solving with e-waste.2.Students will explore battery design and transfer of energy through hands on experiments with household items.3.Students will evaluate and analyze problems with e-waste and research solutions.4.Students will draw and label models to explain circuits demonstrating the movement of energy.5.Students will be able to explain how the measured and compared batteries based on the knowledge learned about volts and using a voltmeter.
Pedagogy & Practice:
21st Century Skills Development,
English Language Strategies,
Engineering Design,
Group Work/Collaboration,
Hands-on Materials,
Phenomena-Driven Instruction,
Research-Secondary
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
2: Developing and Using Models,
4: Analyzing and Interpreting Data,
5: Using Mathematics and Computational Thinking,
6: Constructing Explanations and Designing Solutions,
7: Engaging in Argument from Evidence,
8: Obtaining, Evaluating, and Communicating Information
Author:
Jonathan Strunin
Relevant NGSS PE:
4-PS3-2,
4-PS3-4,
4-ESS3-1,
5-ESS3-1,
3-5-ETS1-1,
3-5-ETS1-2,
3-5-ETS1-3
Other Subjects Covered:
Environmental Sciences,
ELA: Informational Text,
ELA: Reading: Scientific & Technical,
ELA: Vocabulary Development,
Math: Graphing & Representation,
Math: Measurement,
Social Sciences: Analysis
Estimated Activity Length:
10 hours

How might we design a battery that reduces e-waste? Phenomenon and Exploration

Grades:
4-5
Unit:
Understanding E-Waste Through Battery Design
Lesson Number:
1
Description:

During this introduction lesson series students will explore the guiding phenomenon to understand e-waste and connect it to battery design. Students will utilize online resources to learn about problems from e-waste around the world and the environmental...

Energy Content:
Batteries & Storage,
Circuitry,
Electrical Energy,
Electricity Generation,
Electronics,
Electrons,
Energy Fundamentals,
Fuels,
Hydrogen,
Potential & Kinetic Energy,
Solar Photovoltaic,
Wind Energy
+
-
More Details Less Details
Learning Goal(s):
1.Students will learn about the phenomenon of e-waste through online resources to explore the history of electronics.2.Students will ask questions and define problems involving the environmental impact of electronics and human impact.3.Students will evaluate and obtain information about electronic waste from online resources such as news articles and videos.4.Students will learn (or review) knowledge of circuits to design a model and explain how a circuit works.
Pedagogy & Practice:
21st Century Skills Development,
Engineering Design,
Group Work/Collaboration,
Hands-on Materials,
Phenomena-Driven Instruction,
Project-Based Learning,
Research-Secondary
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
2: Developing and Using Models,
6: Constructing Explanations and Designing Solutions,
7: Engaging in Argument from Evidence,
8: Obtaining, Evaluating, and Communicating Information
Author:
Jonathan Strunin
Relevant NGSS PE:
4-PS3-2,
4-PS3-4,
4-ESS3-1,
5-ESS3-1,
3-5-ETS1-1,
3-5-ETS1-2,
3-5-ETS1-3
Other Subjects Covered:
Environmental Sciences,
ELA: Informational Text,
ELA: Reading: Scientific & Technical,
Math: Graphing & Representation,
Math: Measurement,
Social Sciences: Analysis
Estimated Activity Length:
2 hours

Exploring Eco-Friendly Battery Design

Grades:
4-5
Unit:
Understanding E-Waste Through Battery Design
Lesson Number:
2
Description:

In this lesson students will experiment with everyday household items to make batteries. Students will use lemons, potatoes, pennies, and cola to make batteries, and compare the amount of voltage produced. These lessons can be expanded to test a variety of...

Energy Content:
Batteries & Storage,
Circuitry,
Electrical Energy,
Electricity Generation,
Electrons,
Energy Fundamentals,
Hydrogen,
Materials Science,
Potential & Kinetic Energy,
Solar Photovoltaic,
Wind Energy
+
-
More Details Less Details
Learning Goal(s):
1.Students will explore methods to produce energy from everyday items such as potatoes, lemons, pennies, and cola.2.Students will explore battery design and transfer of energy through hands on experiments with household items.3.Students will measure voltage and experiment methods to increase voltage. 4.Students will extend lessons to test out a variety of other materials such as varieties of fruits, vegetables, and sodas to compare different voltage produced. 5.Students will collect and record data from all their experiments to compare the different voltage produced. 6.Students will display data in charts or graphs to analyze the outcomes of their experiments. 
Pedagogy & Practice:
21st Century Skills Development,
Engineering Design,
Group Work/Collaboration,
Hands-on Materials,
Phenomena-Driven Instruction,
Project-Based Learning
NGSS Science and Engineering Practices:
2: Developing and Using Models,
3: Planning and Carrying Out Investigations
Author:
Jonathan Strunin
Relevant NGSS PE:
4-PS3-2,
4-PS3-4,
4-ESS3-1,
5-ESS3-1,
3-5-ETS1-1,
3-5-ETS1-2,
3-5-ETS1-3
Other Subjects Covered:
Math: Graphing & Representation,
Math: Measurement
Estimated Activity Length:
2 hours

Engineering Clean Energy for Our Community

Grades:
4-5
Unit:
Understanding E-Waste Through Battery Design
Lesson Number:
3
Description:

This lesson plan will engage students in a design process to power a motor using a variety of energy sources. Students will compare different clean energy sources to decide which energy source will complete their design goal. Students will experiment with...

Energy Content:
Batteries & Storage,
Circuitry,
Electrical Energy,
Electricity Generation,
Electronics,
Electrons,
Energy Fundamentals,
Fuels,
Hydrogen,
Potential & Kinetic Energy,
Solar Photovoltaic,
Sources of Energy,
Wind Energy
+
-
More Details Less Details
Learning Goal(s):
1.Students will define “clean energy” and explain at least 4 types of alternative energy sources2.Students will compare local energy sources and national energy sources to potential energy sources being used or developed.3.Students will experiment with wind energy, solar energy, and hydrogen fuel cell model vehicles to explore alternative fuel sources.4.Students will measure voltage produced and record data in a table format.5.Students will discuss pros and cons of the different types of energy.
Pedagogy & Practice:
21st Century Skills Development,
Engineering Design,
Group Work/Collaboration,
Hands-on Materials,
Phenomena-Driven Instruction,
Project-Based Learning,
Research-Secondary
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
2: Developing and Using Models,
4: Analyzing and Interpreting Data,
5: Using Mathematics and Computational Thinking,
6: Constructing Explanations and Designing Solutions,
7: Engaging in Argument from Evidence,
8: Obtaining, Evaluating, and Communicating Information
Author:
Jonathan Strunin
Relevant NGSS PE:
5-ESS3-1,
3-5-ETS1-1,
3-5-ETS1-2,
3-5-ETS1-3
Other Subjects Covered:
Environmental Sciences,
ELA: Informational Text,
ELA: Reading: Scientific & Technical,
ELA: Vocabulary Development,
Math: Graphing & Representation,
Math: Measurement,
Social Sciences: Analysis
Estimated Activity Length:
5 hours