Wave Attenuator

Testing a Tidal Wave Attenuator

Grades:
6-12
Unit:
Wave Attenuator
Lesson Number:
3
Description:

Students will test the efficiency of the tidal wave attenuator models that they previously built. They will determine variables on their models they can manipulate, such as wire gauge and magnet strength, and measure the effects of manipulating this...

Energy Content:
Wave Energy
+
-
More Details Less Details
Learning Goal(s):
1. Students will investigate variables that may affect the output of an energy conversion device (wave attenuator). 2. Students will interpret data to identify which variables increase electrical output for these model wave attenuators. 3. Students will communicate results from scientific inquiry to identify factors that are important to optimizing the design of a wave attenuator.
Pedagogy & Practice:
Engineering Design,
Establishing a Culture of Science,
Group Work/Collaboration,
Hands-on Materials,
Project-Based Learning
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
3: Planning and Carrying Out Investigations,
4: Analyzing and Interpreting Data,
6: Constructing Explanations and Designing Solutions,
7: Engaging in Argument from Evidence
Author:
Tabatha Roderick
Relevant NGSS PE:
MS-ESS3-3,
MS-ETS1-1,
MS-ETS1-4,
MS-PS2-4,
MS-PS3-5
Other Subjects Covered:
ELA: Speaking & Listening,
ELA: Writing,
Math: Measurement
Estimated Activity Length:
5 hours

Engineering 101

Grades:
5-8
Unit:
Adrift in a Sea of Plastic
Lesson Number:
3
Description:

This lesson is designed for 3, 50-minute sessions. The students will engage in multiple mini-engineering challenges to develop their understanding of structures and how to build models. The students will also learn to use the 3D pens to create a 3D object...

Energy Content:
Materials Science,
Next Generation Manufacturing
+
-
More Details Less Details
Learning Goal(s):
·       Students will understand some basics of engineering.·       Students will become familiar with 3D pens and how to use them.
Pedagogy & Practice:
21st Century Skills Development,
English Language Strategies,
Engineering Design,
Establishing a Culture of Science,
Group Work/Collaboration,
Hands-on Materials,
Phenomena-Driven Instruction,
Project-Based Learning,
STEAM/Arts
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
6: Constructing Explanations and Designing Solutions
Author:
Jonathan Strunin
Relevant NGSS PE:
5-ESS3-1,
3-5-ETS1-1,
3-5-ETS1-2,
3-5-ETS1-3,
MS-ESS3-3,
MS-ETS1-1,
MS-ETS1-2,
MS-ETS1-3
Estimated Activity Length:
2 hours
Solar Car Student

Solar Car Challenge: Team Brainstorm

Grades:
6-8
Unit:
Solar Car Challenge
Lesson Number:
4
Description:

Students will play around with the solar car kits to familiarize themselves with the materials in preparation for the solar car engineering challenge.

Energy Content:
Solar Photovoltaic
+
-
More Details Less Details
Learning Goal(s):
To introduce students to the problem that this project will attempt to solve: building a solar car that will go straight, far, and fast to win a race.
Pedagogy & Practice:
Establishing a Culture of Science,
Group Work/Collaboration,
Hands-on Materials,
STEAM/Arts
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
2: Developing and Using Models
Author:
Karen Nelson
Relevant NGSS PE:
MS-ESS3-3,
MS-ETS1-1,
MS-ETS1-2,
MS-ETS1-3,
MS-ETS1-4
Other Subjects Covered:
ELA: Speaking & Listening
Estimated Activity Length:
50 min

Design and Engineer Solutions

Grades:
5-8
Unit:
Adrift in a Sea of Plastic
Lesson Number:
4
Description:

This lesson is designed to span 9 days with 50-minute sessions. The students will use a Design and Engineering Journal to guide them in the design and engineering process. In small groups they will use the research from lesson 2 to formulate solutions to...

Energy Content:
Circuitry,
Electrical Energy,
Materials Science,
Next Generation Manufacturing,
Solar Photovoltaic
+
-
More Details Less Details
Learning Goal(s):
Students will take part in the engineering design process.Students will use problem solving skills to make changes to designs.Students will use speaking and listening skills to give presentations and listen to others give their presentation.
Pedagogy & Practice:
21st Century Skills Development,
Culturally Sustaining,
English Language Strategies,
Engineering Design,
Establishing a Culture of Science,
Group Work/Collaboration,
Hands-on Materials,
Phenomena-Driven Instruction,
Project-Based Learning,
Research-Secondary,
STEAM/Arts
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
2: Developing and Using Models,
3: Planning and Carrying Out Investigations,
4: Analyzing and Interpreting Data,
5: Using Mathematics and Computational Thinking,
6: Constructing Explanations and Designing Solutions,
7: Engaging in Argument from Evidence,
8: Obtaining, Evaluating, and Communicating Information
Author:
Jonathan Strunin
Relevant NGSS PE:
5-ESS3-1,
3-5-ETS1-1,
3-5-ETS1-2,
3-5-ETS1-3,
MS-ESS3-3,
MS-ETS1-1,
MS-ETS1-2,
MS-ETS1-3
Other Subjects Covered:
Computer Science,
Environmental Sciences,
ELA: Speaking & Listening,
Math: Geometry,
Math: Graphing & Representation,
Math: Measurement
Estimated Activity Length:
7 hours
Solar Car Student

Solar Car Challenge: Develop Your Solution

Grades:
6-8
Unit:
Solar Car Challenge
Lesson Number:
5
Description:

Students will play around with the solar car kits to familiarize themselves with the materials in preparation for the solar car engineering challenge.

Energy Content:
Solar Photovoltaic
+
-
More Details Less Details
Learning Goal(s):
To introduce students to the problem that this project will attempt to solve: building a solar car that will go straight, far, and fast to win a race.
Pedagogy & Practice:
Engineering Design,
Group Work/Collaboration,
Hands-on Materials,
Research-Secondary
NGSS Science and Engineering Practices:
6: Constructing Explanations and Designing Solutions
Author:
Karen Nelson
Relevant NGSS PE:
MS-ESS3-3,
MS-ETS1-1,
MS-ETS1-2,
MS-ETS1-3,
MS-ETS1-4
Estimated Activity Length:
50 min

Part 2 - Lesson 2: Wind Energy

Grades:
6-12
Unit:
A Community Powered by Renewable Energy
Lesson Number:
5
Description:

Students will learn about wind and how wind varies across geographies. Students will use Vernier Wind Turbine kits or homemade wind turbines to experiment with blade angles and wind speed. During experimentation, students will collect data as blade angles...

Energy Content:
Electrical Energy,
Electricity Generation,
Sources of Energy,
Wind Energy
+
-
More Details Less Details
Learning Goal(s):
1.Students will conduct an experiment where blade angles are the variable and wind speed is constant.2.Students will conduct an experiment where blade angles are constant and wind speed varies.3.Students will collect and analyze data to provide a conclusion to the questions: What is the optimal blade angle for generating the most energy? What is the optimal wind speed for generating the most energy?4.Students will research prevailing winds and use a provided map of their region to indicate wind speed and direction.5.Students will propose locations for wind farms based on optimal energy generation and zoning restrictions.6.Based on their proposals, students will determine a range of potential kilowatt generation from wind power.
Pedagogy & Practice:
21st Century Skills Development,
Engineering Design,
Establishing a Culture of Science,
Group Work/Collaboration,
Hands-on Materials,
Multiple Learning Styles,
Phenomena-Driven Instruction,
Place-Based Learning,
Project-Based Learning
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
2: Developing and Using Models,
3: Planning and Carrying Out Investigations,
4: Analyzing and Interpreting Data,
5: Using Mathematics and Computational Thinking,
6: Constructing Explanations and Designing Solutions,
7: Engaging in Argument from Evidence,
8: Obtaining, Evaluating, and Communicating Information
Author:
Jonathan Strunin
Relevant NGSS PE:
MS-ESS3-3,
MS-ESS3-4,
MS-ETS1-1,
MS-ETS1-2,
MS-ETS1-3,
MS-ETS1-4,
MS-PS3-2,
HS-ESS3-2,
HS-ESS3-4,
HS-ETS1-1,
HS-ETS1-2,
HS-ETS1-3,
HS-ETS1-4,
HS-PS3-3
Other Subjects Covered:
Math: Measurement,
Social Sciences: Geography
Estimated Activity Length:
10 hours
Solar Car Student

Solar Car Challenge: Test Your Solution

Grades:
6-8
Unit:
Solar Car Challenge
Lesson Number:
6
Description:

Students will play around with the solar car kits to familiarize themselves with the materials in preparation for the solar car engineering challenge.

Energy Content:
Solar Photovoltaic
+
-
More Details Less Details
Learning Goal(s):
To introduce students to the problem that this project will attempt to solve: building a solar car that will go straight, far, and fast to win a race.
Pedagogy & Practice:
Engineering Design,
Group Work/Collaboration,
Hands-on Materials
NGSS Science and Engineering Practices:
3: Planning and Carrying Out Investigations,
4: Analyzing and Interpreting Data
Author:
Karen Nelson
Relevant NGSS PE:
MS-ESS3-3,
MS-ETS1-1,
MS-ETS1-2,
MS-ETS1-3,
MS-ETS1-4
Other Subjects Covered:
Math: Measurement
Estimated Activity Length:
50 min
Solar Car Student

Solar Car Challenge: Solutions Briefing

Grades:
6-8
Unit:
Solar Car Challenge
Lesson Number:
7
Description:

Students will play around with the solar car kits to familiarize themselves with the materials in preparation for the solar car engineering challenge.

+
-
More Details Less Details
Learning Goal(s):
To introduce students to the problem that this project will attempt to solve: building a solar car that will go straight, far, and fast to win a race.
Pedagogy & Practice:
Engineering Design,
Establishing a Culture of Science,
Group Work/Collaboration
NGSS Science and Engineering Practices:
8: Obtaining, Evaluating, and Communicating Information
Author:
Karen Nelson
Relevant NGSS PE:
MS-ESS3-3,
MS-ETS1-1,
MS-ETS1-2,
MS-ETS1-3,
MS-ETS1-4
Other Subjects Covered:
ELA: Speaking & Listening,
ELA: Writing
Estimated Activity Length:
50 min
Solar Car Student

Solar Car Challenge: Redesigning Your Solution & Results of the Design Process Activity

Grades:
6-8
Unit:
Solar Car Challenge
Lesson Number:
8
Description:

Students will play around with the solar car kits to familiarize themselves with the materials in preparation for the solar car engineering challenge.

Energy Content:
Solar Photovoltaic
+
-
More Details Less Details
Learning Goal(s):
To introduce students to the problem that this project will attempt to solve: building a solar car that will go straight, far, and fast to win a race.
Pedagogy & Practice:
Engineering Design,
Establishing a Culture of Science,
Group Work/Collaboration
NGSS Science and Engineering Practices:
6: Constructing Explanations and Designing Solutions
Author:
Karen Nelson
Relevant NGSS PE:
MS-ESS3-3,
MS-ETS1-1,
MS-ETS1-2,
MS-ETS1-3,
MS-ETS1-4
Estimated Activity Length:
2 hours

Pages