SODIS_UV Treament

Solar and SODIS: Creating Clean Water for the World

Grades:
5-8
Description:

According to Nobel Laureate Richard Smalley, the number one and two challenges for humanity are energy and clean water. This classroom activity will introduce students to a low cost, renewable technique that connects these two issues. During the activity,...

+
-
More Details Less Details
Learning Goal(s):
Students will be introduced to the range of microbes in the environment, understand the risks of “dirty water” and be able to explain how energy from the sun can purify water through the SODIS technique.
Author:
Jamie Repasky
Estimated Activity Length:
1 hour

Unit Plan: A Community Powered by Renewable Energy

Grades:
6-12
Description:

In this three-part comprehensive place-based and project-based unit, students will learn and apply rebnewable energy content to devise action plans at an individual, family, and local level. Students will use primary and secondary research explore energy...

+
-
More Details Less Details
Learning Goal(s):
LEARNING GOALS – PART 11.Students will define and explain the differences between renewable and non-renewable energy sources.2.Students will research, summarize, and present the (short- and long-term) benefits and drawbacks of utilizing wind and solar energy. 3.Students will research, summarize, and present the (short- and long-term) benefits and drawbacks of utilizing fossil fuels.4.Students will generate questions about the greenhouse gas effect, identify and isolate variables, and then conduct an experiment to answer a class generated question about the greenhouse gas effect.5.Through Socratic seminar, students will use the knowledge gained over the course of this lesson to discuss the potential long- and short-term benefits and drawbacks of using fossil fuels, solar energy, and wind energy.6.Students will define scientific vocabulary related to electricity.7.Students will be able to describe how electricity moves through a conductor.8.Students will draw and describe series and parallel circuits.9.Students will identify ways that energy is consumed within their homes.10.Students will perform an energy audit of their home and calculate the amount of energy used by each electronic device and appliances.11.Students will create a spreadsheet demonstrating the electricity required to operate each electronic device and appliance, along with a summary of finding that clearly identifies how energy consumption can be reduced within their home.12.Students will explore various ways to reduce energy (goal is 30% reduction).13.Students will propose a variety of energy reduction plans and present those options to their families for discussion.14.After discussion with their families, students will itemize the agreed upon plan and identify specific actions that result in quantifiable outcomes that will implemented to reduce energy consumption by their families.LEARNING GOALS – PART 21.Students will gain background information regarding the limitations of having and wind and solar generating infrastructure within city and county limits, including environmental, aesthetic, and cultural considerations. 2.Students will work with professionals to compile criteria for placement of wind and solar energy sources.3.Students will conduct experiments to collect and analyze data to provide a conclusion to the questions: What is the optimal blade angle for generating the most energy? What is the optimal wind speed for generating the most energy?4.Students will use prevailing wind data in your region to examine energy output of various sized small wind turbines as wind speeds incrementally increase.5.Based on local wind speeds, students will determine a range of potential kilowatt generation from wind power.6.Students will conduct experiments to determine how electrical output of solar panels change as the tilt, azimuth, and shade coverage change.7.Students will generate, compare, and evaluate various solar configurations for a solar project in your region.LEARNING GOALS – PART 31.Students will utilize previously acquired information about energy needs to create a renewable energy proposal for your town or city.2.Students will perform a solar audit on their homes and use class averages to project the amount of solar energy that can be generated on residential properties.3.Students will assess where commercial and municipal solar projects can occur within your town or city to meet the energy needs for non-residential consumers.4.Students will determine potential locations for larger-scale wind and solar farms to augment the remaining energy needs of the community.5.Students will prepare a comprehensive renewable energy plan that totals the calculations for potential residential, commercial, and agency renewable energy generation.6.Students will calculate the average amount of energy generated by wind turbines and solar panels in various conditions to determine the quantity of renewable energy sources required to power the city.7.Students will use their projected energy calculations to propose a combination of wind and solar sources to meet your locality’s energy needs, based on benefits and drawbacks of each source of energy.8.Based on prevailing winds and building orientation, students will explore potential sites for wind turbines and solar panels.9.Students will develop a final proposal to meet future energy needs through a combination of energy generation and reduction of energy consumption, prepare a brief slide presentation that summarizes their comprehensive plans, and present their finding to local energy conservation groups and local government staff or elected officials.
Author:
Jonathan Strunin
Estimated Activity Length:
10 hours

Unit Plan: Understand E-Waste Through Battery Design

Grades:
4-5
Description:

In this lesson students will further explore their understanding of energy, electricity, and basic circuits. Students will begin their exploration of batteries by questioning where batteries end up when we are done using them, making connections to e-waste...

+
-
More Details Less Details
Learning Goal(s):
1.Students will make connections to real world problem solving with e-waste.2.Students will explore battery design and transfer of energy through hands on experiments with household items.3.Students will evaluate and analyze problems with e-waste and research solutions.4.Students will draw and label models to explain circuits demonstrating the movement of energy.5.Students will be able to explain how the measured and compared batteries based on the knowledge learned about volts and using a voltmeter.
Author:
Jonathan Strunin
Estimated Activity Length:
10 hours

Adrift in a Sea of Plastic Unit Plan

Grades:
5-8
Description:

In this unit students will investigate the phenomena of plastic trash islands floating in the Pacific and Atlantic Oceans. The students will work to solve the problem of plastic trash islands through the engineering and design process. Using 3D printers,...

+
-
More Details Less Details
Learning Goal(s):
·       Students will design 3D models using Tinkercad software.·       Students will define the problem of plastic trash islands.·       Students will describe possible solutions to the problem of plastic trash islands.·       Students will research the plastic trash problem and create google slideshows the problem and how we might fix it.·       Students will investigate different ways to build structures that both float and hold weight.·       Students will build a model of a device that could collect plastic from the ocean.·       Students will test the models they build.·       Students will communicate their results from scientific inquiry to identify factors that are important to optimizing the design of the plastic collecting device.
Author:
Jonathan Strunin
Estimated Activity Length:
10 hours
Sun in Space

Our Place in Space: Cosmic Rays

Grades:
3-5
Lesson Number:
1
Description:

NOTE: SUN PHOTOMETER SUMULATOR AT CAS.HAMPTONU.EDU SEEMS TO BE NO LONGER AVAILABLE.

Using a map of school buildings, students will pick four areas to monitor over the year using wireless weather stations and the Solar Power Meter. In a following...

+
-
More Details Less Details
Learning Goal(s):
Students will learn how the sun affects their school by measuring the temperature at different locations around the building in the fall, winter, and spring. They will learn how to measure solar energy and look for trends in temperature and solar power over the year. These trends will then be used to investigate how energy reaches Earth from the Sun.
Author:
Jamie Repasky
Estimated Activity Length:
3 hours
Simple Solar Water Heater

Making the Standard Solar Heater

Grades:
6-8
Lesson Number:
1
Description:

In part one of the activity students will be asked to create a simple solar heater, measure the temperature change in a vial of water, then calculate the heat energy transferred to a vial of water. Students will construct the solar heater, place a set...

+
-
More Details Less Details
Learning Goal(s):
In this activity students will learn that sunlight energy can be transformed into other forms of energy and that the amount of sunlight energy captured by an object can be quantified and measured.
Author:
Nathan Franck
Estimated Activity Length:
1 hour
Solar Circuit

How the Amount of Light Affects a Solar Cell

Grades:
6-8
Unit:
Lesson Number:
1
Description:

Students will cover portions of a solar cell and measure the output with a multimeter. They will compare and contrast the outputs of different percentages shaded and different configurations using the same percentage shaded.

+
-
More Details Less Details

Part 1 - Lesson 1: Why Use Renewable Energy?

Grades:
6-12
Lesson Number:
1
Description:

The purpose of this lesson is for students to obtain base knowledge of how renewable and non-renewable energy is generated and identify differences between renewable resources and fossil fuels. Students will research the potential long-term and short-term...

+
-
More Details Less Details
Learning Goal(s):
1.Students will define and explain the differences between renewable and non-renewable energy sources.2.Students will research, summarize, and present the (short- and long-term) benefits and drawbacks of utilizing wind and solar energy.  3.Students will research, summarize, and present the (short- and long-term) benefits and drawbacks of utilizing fossil fuels.4.Students will generate questions about the greenhouse gas effect, identify and isolate variables, and then conduct an experiment to answer a class generated question about the greenhouse gas effect.5.Through Socratic seminar, students will use the knowledge gained over the course of this lesson to discuss the potential long- and short-term benefits and drawbacks of using fossil fuels, solar energy, and wind energy.
Author:
Jonathan Strunin
Relevant NGSS PE:
Estimated Activity Length:
8 hours

How might we design a battery that reduces e-waste? Phenomenon and Exploration

Grades:
4-5
Lesson Number:
1
Description:

During this introduction lesson series students will explore the guiding phenomenon to understand e-waste and connect it to battery design. Students will utilize online resources to learn about problems from e-waste around the world and the environmental...

+
-
More Details Less Details
Learning Goal(s):
1.Students will learn about the phenomenon of e-waste through online resources to explore the history of electronics.2.Students will ask questions and define problems involving the environmental impact of electronics and human impact.3.Students will evaluate and obtain information about electronic waste from online resources such as news articles and videos.4.Students will learn (or review) knowledge of circuits to design a model and explain how a circuit works.
Author:
Jonathan Strunin
Estimated Activity Length:
2 hours
Dye in Water

Developing a Model of Thermal Energy, Atoms, and Molecules

Grades:
6-8
Lesson Number:
2
Description:

Through a series of exploration and inquiry activities, students will explain kinetic molecular theory, atomic, and molecular structures. Students will be challenged to gradually increase the precision of their explanation of molecular-level structures...

+
-
More Details Less Details
Learning Goal(s):
Students will develop a model through collaborative inquiry to explain thermal kinetic energy and predict the outcome when heat is added to a substance. Students will build argumentation from evidence skills through collaborative sense-making and gallery walk presentations. Students will develop a model of atomic and molecular structures.  
Author:
Melody Childers
Relevant NGSS PE:
Estimated Activity Length:
9 hours