Unit Plan: Understand E-Waste Through Battery Design

Grades:
4-5
Unit:
Understanding E-Waste Through Battery Design
Description:

In this lesson students will further explore their understanding of energy, electricity, and basic circuits. Students will begin their exploration of batteries by questioning where batteries end up when we are done using them, making connections to e-waste...

Energy Content:
Batteries & Storage,
Circuitry,
Electrical Energy,
Electricity Generation,
Electronics,
Electrons,
Fuels,
Hydrogen,
Potential & Kinetic Energy,
Solar Photovoltaic,
Sources of Energy,
Wind Energy
+
-
More Details Less Details
Learning Goal(s):
1.Students will make connections to real world problem solving with e-waste.2.Students will explore battery design and transfer of energy through hands on experiments with household items.3.Students will evaluate and analyze problems with e-waste and research solutions.4.Students will draw and label models to explain circuits demonstrating the movement of energy.5.Students will be able to explain how the measured and compared batteries based on the knowledge learned about volts and using a voltmeter.
Pedagogy & Practice:
21st Century Skills Development,
English Language Strategies,
Engineering Design,
Group Work/Collaboration,
Hands-on Materials,
Phenomena-Driven Instruction,
Research-Secondary
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
2: Developing and Using Models,
4: Analyzing and Interpreting Data,
5: Using Mathematics and Computational Thinking,
6: Constructing Explanations and Designing Solutions,
7: Engaging in Argument from Evidence,
8: Obtaining, Evaluating, and Communicating Information
Author:
Jonathan Strunin
Relevant NGSS PE:
4-PS3-2,
4-PS3-4,
4-ESS3-1,
5-ESS3-1,
3-5-ETS1-1,
3-5-ETS1-2,
3-5-ETS1-3
Other Subjects Covered:
Environmental Sciences,
ELA: Informational Text,
ELA: Reading: Scientific & Technical,
ELA: Vocabulary Development,
Math: Graphing & Representation,
Math: Measurement,
Social Sciences: Analysis
Estimated Activity Length:
10 hours

Adrift in a Sea of Plastic Unit Plan

Grades:
5-8
Unit:
Adrift in a Sea of Plastic
Description:

In this unit students will investigate the phenomena of plastic trash islands floating in the Pacific and Atlantic Oceans. The students will work to solve the problem of plastic trash islands through the engineering and design process. Using 3D printers,...

Energy Content:
Circuitry,
Electrical Energy,
Materials Science,
Next Generation Manufacturing,
Solar Photovoltaic
+
-
More Details Less Details
Learning Goal(s):
·       Students will design 3D models using Tinkercad software.·       Students will define the problem of plastic trash islands.·       Students will describe possible solutions to the problem of plastic trash islands.·       Students will research the plastic trash problem and create google slideshows the problem and how we might fix it.·       Students will investigate different ways to build structures that both float and hold weight.·       Students will build a model of a device that could collect plastic from the ocean.·       Students will test the models they build.·       Students will communicate their results from scientific inquiry to identify factors that are important to optimizing the design of the plastic collecting device.
Pedagogy & Practice:
21st Century Skills Development,
Culturally Sustaining,
English Language Strategies,
Engineering Design,
Establishing a Culture of Science,
Group Work/Collaboration,
Hands-on Materials,
Phenomena-Driven Instruction,
Project-Based Learning,
Research-Secondary,
STEAM/Arts
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
2: Developing and Using Models,
4: Analyzing and Interpreting Data,
5: Using Mathematics and Computational Thinking,
7: Engaging in Argument from Evidence,
8: Obtaining, Evaluating, and Communicating Information
Author:
Jonathan Strunin
Relevant NGSS PE:
5-ESS3-1,
3-5-ETS1-1,
3-5-ETS1-2,
3-5-ETS1-3,
MS-ESS3-3,
MS-ETS1-1,
MS-ETS1-2,
MS-ETS1-3
Other Subjects Covered:
Computer Science,
Environmental Sciences,
ELA: Informational Text,
ELA: Speaking & Listening,
ELA: Writing,
Math: Geometry,
Math: Graphing & Representation
Estimated Activity Length:
10 hours
Arduino Angler Design

Illuminate Me: Merging Conductive Sewing, Technology, and Solar Power

Grades:
7-12
Unit:
Illuminate Me
Description:

Light up your clothing using solar power! For this unit, students will attach thin, flexible solar modules to a bike helmet and recharge NiMH rechargeable batteries for a renewable energy battery pack. The rechargeable batteries will be used to light up...

Energy Content:
Batteries & Storage,
Circuitry,
Electrical Energy,
Electronics,
Solar Photovoltaic
+
-
More Details Less Details
Learning Goal(s):
1. Students will design and sew a wearable circuit using conductive thread. 2. Students will program a wearable microcontroller to light up garment with bright LEDs. 3. Students will incorporate solar power into a wearable garment project by recharging NiMH batteries for a renewable energy battery pack. 4. Students will apply knowledge of circuitry and energy transfer to maximize design.
Pedagogy & Practice:
21st Century Skills Development,
Project-Based Learning,
Hands-on Materials,
Engineering Design
NGSS Science and Engineering Practices:
2: Developing and Using Models,
5: Using Mathematics and Computational Thinking,
6: Constructing Explanations and Designing Solutions,
7: Engaging in Argument from Evidence,
8: Obtaining, Evaluating, and Communicating Information
Author:
Kristy Schneider
Relevant NGSS PE:
MS-ETS1-1,
MS-PS1-3,
MS-PS3-5,
HS-ETS1-2,
HS-ETS1-3,
HS-ETS1-4
Other Subjects Covered:
Computer Science,
ELA: Speaking & Listening,
ELA: Vocabulary Development,
Math: Graphing & Representation,
Math: Measurement
Estimated Activity Length:
10 hours
Lead Acid Battery

Solar Battery Charging

Grades:
7-12
Unit:
Solar Battery Charging
Description:

Students will become familiar with circuits, cells, batteries, and photovoltaic cells, then plan, build, test, modify, and re-test a small solar battery charger designed to maintain batteries from a particular device.

Energy Content:
Batteries & Storage,
Circuitry,
Electrical Energy,
Electricity Generation,
Solar Photovoltaic
+
-
More Details Less Details
Learning Goal(s):
Students will build series, parallel, and parallel series circuits from a schematic diagram. Students will master the basic concept of battery charging. Students will be able to plan and build solar battery chargers for a given battery system. Intermediate students will calculate time to charge a depleted battery to its full capacity given specifications of a solar module. Students will be able to explain how a solar cell works with diagrams and words. Students will use a digital multi-meter to measure voltage, current, resistance, and diode polarity.
Pedagogy & Practice:
Hands-on Materials,
Group Work/Collaboration,
Engineering Design
NGSS Science and Engineering Practices:
2: Developing and Using Models,
3: Planning and Carrying Out Investigations,
5: Using Mathematics and Computational Thinking,
6: Constructing Explanations and Designing Solutions,
8: Obtaining, Evaluating, and Communicating Information
Author:
Luke Robbins
Relevant NGSS PE:
MS-ETS1-1,
HS-ESS3-4,
HS-ETS1-2,
HS-PS3-3
Other Subjects Covered:
ELA: Vocabulary Development,
Math: Algebra,
Math: Measurement
Estimated Activity Length:
9 hours

Keeping it Cool With Solar Unit Plan

Grades:
K-2
Unit:
Keeping it Cool With Solar
Description:

Keeping It Cool With Solar unit asks the question: “How might we design a structure that will keep us cool on a hot day?” As an anchoring phenomenon, students will be shown a time-lapse video of an ice cube melting, and a second phenomenon of a solar...

Energy Content:
Energy Efficiency,
Energy Fundamentals,
Light (Visible),
Solar Thermal
+
-
More Details Less Details
Learning Goal(s):
Students will make observations to determine the effect of sunlight on Earth’s surface. Students will plan and conduct investigations to determine whether structures made with various materials will keep objects cool when placed in a beam of light. Students will analyze data from tests of two objects designed to solve the same problem in order to compare the strengths and weaknesses of how each performs. Students will analyze data obtained from testing different materials to determine which materials have the properties that are best suited for keeping an object cool. Students will test if solar panels and solar energy can help cool down their structure.
Pedagogy & Practice:
Early Childhood Learning,
Engineering Design,
Establishing a Culture of Science,
Hands-on Materials,
Phenomena-Driven Instruction
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
2: Developing and Using Models,
3: Planning and Carrying Out Investigations,
4: Analyzing and Interpreting Data,
5: Using Mathematics and Computational Thinking,
6: Constructing Explanations and Designing Solutions,
7: Engaging in Argument from Evidence,
8: Obtaining, Evaluating, and Communicating Information
Author:
Mark Lewin
Relevant NGSS PE:
K-PS3-1
Other Subjects Covered:
ELA: Speaking & Listening
Estimated Activity Length:
4 hours

Cost Effective Solar Cells Unit Plan

Grades:
9-12
Unit:
Cost Effective Solar Cells
Description:

Through a series of solar panel and solar cell construction activities, students will learn the basic principles of energy conversion from light energy to chemical & electrical energy. Students will assemble and test pre-constructed solar panels to...

Energy Content:
Circuitry,
Electrical Energy,
Electricity and Magnetism,
Electronics,
Light (Visible),
Solar Photovoltaic
+
-
More Details Less Details
Learning Goal(s):
Students will discuss social, cultural, and economic implications of sustainable solar energy.Students will construct and test solar panel arrays to power LED lights, fan motors, and music playersStudents will review circuitry basics and solar cell layersStudents will analyze and share out power generation results with classmatesStudents will construct and test an oxidized copper sheet solar cellStudents will share and analyze oxidized copper sheet solar cell dataStudents will construct and test titanium dioxide coated “raspberry juice” solar cellsStudents will collect and analyze titanium dioxide coated “raspberry juice” solar cell data.Students will discuss results and draw conclusions about variables that may affect power generationStudents will visit a solar cell or silicon manufacturing facility and/or engage with guest speakers. Students will learn more detailed solar cell principles and manufacturing techniques involved in solar cell constructionStudents will research chemicals, materials and procedures for their own solar cell designsStudents will build and present models of their proposed solar cellsStudents will construct and test unique solar cellsStudents will present construction progress and project obstaclesStudents will format solar cell data, draw conclusions, and construct an engineering report as a research poster
Pedagogy & Practice:
Engineering Design,
Hands-on Materials,
Multiple Learning Styles,
Project-Based Learning,
Research-Secondary
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
2: Developing and Using Models,
3: Planning and Carrying Out Investigations,
4: Analyzing and Interpreting Data,
5: Using Mathematics and Computational Thinking,
6: Constructing Explanations and Designing Solutions,
7: Engaging in Argument from Evidence,
8: Obtaining, Evaluating, and Communicating Information
Author:
Tom Wolverton
Relevant NGSS PE:
HS-ETS1-1,
HS-ETS1-2,
HS-ETS1-3,
HS-ETS1-4,
HS-PS1-2,
HS-PS2-6,
HS-PS3-3
Other Subjects Covered:
Environmental Sciences,
ELA: Reading: Scientific & Technical
Estimated Activity Length:
10 hours
Simple Solar Water Heater

Making the Standard Solar Heater

Grades:
6-8
Unit:
Experimenting with Solar Heaters
Lesson Number:
1
Description:

In part one of the activity students will be asked to create a simple solar heater, measure the temperature change in a vial of water, then calculate the heat energy transferred to a vial of water. Students will construct the solar heater, place a set...

Energy Content:
Potential & Kinetic Energy,
Solar Thermal,
Thermal Energy (Heat)
+
-
More Details Less Details
Learning Goal(s):
In this activity students will learn that sunlight energy can be transformed into other forms of energy and that the amount of sunlight energy captured by an object can be quantified and measured.
Pedagogy & Practice:
Engineering Design,
Group Work/Collaboration,
Hands-on Materials,
Project-Based Learning
NGSS Science and Engineering Practices:
2: Developing and Using Models,
3: Planning and Carrying Out Investigations,
4: Analyzing and Interpreting Data,
5: Using Mathematics and Computational Thinking,
6: Constructing Explanations and Designing Solutions,
7: Engaging in Argument from Evidence
Author:
Nathan Franck
Relevant NGSS PE:
MS-PS1-4,
MS-PS3-5,
MS-PS4-2
Other Subjects Covered:
ELA: Writing,
Math: Algebra,
Math: Functions,
Math: Graphing & Representation,
Math: Measurement
Estimated Activity Length:
1 hour
Sphero SPRK+

Introduction to Drag and Drop Coding Using Scratch

Grades:
6-8
Unit:
Solar SPRK+
Lesson Number:
1
Description:

Students go through a series of exercises and projects/challenges to gain familiarity with coding, specifically with drag-and-drop coding. Students will look at Scratch, a free introductory computer programming language, which focuses on creative computing...

Energy Content:
Electronics
+
-
More Details Less Details
Learning Goal(s):
Students will understand how to properly order basic blocks of code to program simple functions.Students will determine the steps needed to debug issues in block programming.Students will devise methods to achieve basic animation-focused block programming tasks.Students will combine music and animation to create music videos and simple games using block coding.
Pedagogy & Practice:
21st Century Skills Development,
Project-Based Learning
NGSS Science and Engineering Practices:
5: Using Mathematics and Computational Thinking
Author:
Deb Frankel
Relevant NGSS PE:
MS-ETS1-1,
MS-ETS1-2,
MS-ETS1-3
Other Subjects Covered:
Computer Science
Estimated Activity Length:
10 hours
Solar Charger Diagram

Replacing Fossil Fuels?

Grades:
10-12
Unit:
Solar Transportation
Lesson Number:
1
Description:

As students begin to look at the role photovoltaics might play within the transportation energy sector, it is important for them to understand why the phasing-out of fossil fuels is such a daunting task. This lesson is designed to help students comprehend...

Energy Content:
Batteries & Storage,
Biomass Energy,
Energy Fundamentals,
Fuels,
Materials Science,
Sources of Energy,
Transportation
+
-
More Details Less Details
Learning Goal(s):
1. Students will define energy density. 2. Students will compare energy densities among various transportation fuel options. 3. Students will compare costs per unit of energy among various transportation fuel options. 4. Students will compare energy return on energy invested among various transportation fuel options. 5. Students will assess which fuels have the most potential to replace fossil fuels in the transportation sector using a weighted matrix.
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
5: Using Mathematics and Computational Thinking
Author:
Clayton Hudiburg
Relevant NGSS PE:
HS-ETS1-1,
HS-ETS1-3
Other Subjects Covered:
Math: Addition, Subtraction, Multiplication, Division,
Math: Algebra,
Math: Measurement
Estimated Activity Length:
1 hour
Car Charger Schematic

Electrical Energy and Solar Module Efficiency

Grades:
7-12
Unit:
Off the Grid
Lesson Number:
1
Description:

This lesson will let students do research to define terms that will be used in this unit. They will record this information in their Journals, which can be scientific or simple homemade notebooks. This lesson will also introduce the multimeter, small solar...

Energy Content:
Circuitry,
Electrical Energy,
Energy Efficiency,
Energy Fundamentals,
Solar Photovoltaic
+
-
More Details Less Details
Learning Goal(s):
1. Students will document necessary terms in their journals 2. Students will be able to set up a multimeter to measure voltage 3. Students will be able to set up a multimeter to measure current 4. Students will be able to calculate power from data collected 5. Students should be able to measure the collector area of a solar module (area of solar cell(s) within solar module) and represent this value in square meters (m^2)
Pedagogy & Practice:
Group Work/Collaboration,
Hands-on Materials,
Research-Secondary
NGSS Science and Engineering Practices:
3: Planning and Carrying Out Investigations,
4: Analyzing and Interpreting Data,
5: Using Mathematics and Computational Thinking,
7: Engaging in Argument from Evidence,
8: Obtaining, Evaluating, and Communicating Information
Author:
Brett McFarland
Relevant NGSS PE:
MS-ETS1-3,
MS-PS2-3,
HS-ETS1-3,
HS-PS3-1,
HS-PS3-3
Other Subjects Covered:
ELA: Reading: Scientific & Technical,
ELA: Writing,
ELA: Vocabulary Development,
Math: Addition, Subtraction, Multiplication, Division,
Math: Measurement
Estimated Activity Length:
4 hours

Pages